All chemicals are 100% chemical, no fillers added.
100% Active Power Washer Chemical for Iron and Steel Parts. Contains agents to remove carbon, paint, rust scale, varnish, oil and grease. It comes in powder form with a ph between 13 to 13.5. Operating temperature is 160 to 210 degrees Fahrenheit. Available in 50 lb pails or 500 lb drums.
MART POWER KLEEN is 100% chemical. No FILLERS added!
Use quantity: Add 4.5 oz per gallon of water for routine cleaning. Add approximately 8-24 oz. per gallon for full loose rust and scale stripping. Power Kleen is low foaming.
100% Active Power Washer Chemical for Iron, Aluminum and Non-Ferrous Parts. Contains agents to safely remove oil, grease, paint scale and discrete carbon deposits. It comes in a powder form with a ph between 11.5 to 12.5. Operating temperature is between 160 to 210 degrees Fahrenheit. Available in 50 lb pails or 400 lb drums.
MART POWER KLEEN is 100% chemical. No FILLERS added!
Use quantity: Add approximately 4.5 oz. per gallon of hot water.
Power Kleen II is biodegradable and low foaming. It has excellent rinse ability.
100% Active Power Washer Chemical for Electric Apparatus Assemblies and Components. Contains agents to safely remove oil, grease, paint scale, discrete carbon deposits, and imbedded particulate without damage. It comes in a liquid form with a ph of 12. Operating temperature is between 140 to 210 degrees Fahrenheit. Available in 5 gallon pails and 55 gallon drums.
MART POWER KLEEN is 100% chemical. No FILLERS added!
Use quantity: Add approximately 2-4 oz. chemical per gallon of hot water.
Power Kleen III L is low foaming, and has better rinsing than Power Kleen III P.
100% Active Power Washer Chemical for cleaning Aircraft Components. Contains agents to safely remove oil, grease, brake residue, and rubber residue. Used for cleaning wheel, brake and engine parts prior to inspection, repair and rebuilding. It comes in liquid form with a ph between 11.5 to 12.4. Operating temperature is 160 degrees Fahrenheit and above. Available in 5 gallon pails or 55 gallon drums.
MART POWER KLEEN is 100% chemical. No FILLERS added!
Use quantity: Add approximately 2% to 25% by volume.
Power Kleen IV is low foaming and it has excellent rinse ability.
100% Active Power Washer Chemical controls foam in a machine. Defoamant "A" is a concentrated non-silicone defoamer which will not inhibit cleaning ability of MART Power Kleen chemicals. Defoamant "A" will not cause paint adhesion or fish eye problems. It comes is a liquid form with a ph between 6-8. Operating temperature is between 140 to 210 degrees Fahrenheit. Available by the gallon or in 5 gallon pails.
MART POWER KLEEN is 100% chemical. No FILLERS added!
Use quantity: Add approximately 0.02% to 0.05% of total water volume.
100% Active Power Washer Chemical for Steel, Iron and Yellow Metal Parts Protection. It will provide short term rust protection. Concentrated solution provides small quantity usage at a low cost. It comes in a liquid form with a ph of 11.5. It comes in 5 gallon pails or 55 gallon drums.
|
