| Home | Contact |
MART Products



Parts Washer Specifications

HURRICANE 60 Hi-Profile
Retractable Turntable
Engineered to wash larger Caterpillar engine blocks and EMD locomotive blowers, the Hurricane 60 Hi-Profile is capable of removing the toughest soils so that secondary cleaning steps are not needed.

 

request quote / info
Features & General Construction:
 

Closed Loop Zero Discharge

Standard

Wash Pump Suction Strainer

Standard

Adjustable Thermostat

Standard

Temperature Gauge

Standard

24 Hour 7 Day Clock

Standard

Low Water System Shut-Off

Standard

Door Safety Interlock

Standard

Wash Cycle Timer

Standard

Sheet Steel Cabinet Thickness

7 ga

230 V or 460 V 60 Hz, 3-Ph Controls

Standard

Automatic Water Level Control & Refill

Standard


Power Blast Manifold:

 

OSCILLATING NON-SYNCHRONOUS

     

Angle of Oscillation

39 degrees

Frequency of Oscillation

4 per minute

Number of Wash Nozzles

20

Type of Nozzle

Vee-Jet

Nozzle Material

316 Stainless

Nozzle Spray Pattern

25 degrees

   

Overall Dimensions:

 

Width ( Standard Unit )

106 inches

Depth ( Standard Unit )

91 inches

Height

120 inches 

Empty Weight

6,850 lbs

Reservoir Capacity

350 gallons

Duplex Reservoir Add 47 gallons

Sludge Capacity

80 gallons

   

Work Area Dimensions:

 

Turntable Diameter

60 inches

Work Height

75 inches

Table Load Capacity

4,000 lbs

Heavy Duty Capacity

7,000 lbs
        

Heat System:

 

Operating Temperature

140 - 180 degrees F

Initial Heat-Up Time

45 - 100 minutes

Element Size

60 kW

       

Electrical:

 

Motor Rating

Continuous Duty

Motor Starters

Across the Line

Enclosures

TEFC

Short Circuit Protection

Standard

Enclosures

NEMA 12

Overall Protection

Standard

Wiring Conduit

Flex Non-Metallic

Motor Type

Industrial

Type of Conduit

Liquidtight NEMA 12

       

Pump System & Performance:

 

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller.  Note:  All performance data taken at nozzle tip.

     

     
Standard:
30 Horsepower
Total System Flow 343 gpm
Flow per Nozzle 14.3 gpm
System Pressure 121 psi
Blast Velocity 133 ft/sec
Upgrades:
55 Horsepower (Duplex)
Total System Flow 399 gpm
Flow per Nozzle 16.6 gpm
System Pressure 163 psi
Blast Velocity 155 ft/sec
       
70 Horsepower (Duplex)
Total System Flow 431 gpm
Flow per Nozzle 18.0 gpm
System Pressure 190 psi
Blast Velocity 168 ft/sec
       
Optional Features:
 
  • 15,000 lb Turntable
  • Short High-Impact Manifold (SHIM)
  • Pump Sound Insulation
  • Pump Amp Meter (Simplex Pump)
  • Cabinet Thermal Insulation
  • Auto Rinse Cycle (includes ASE)
  • Auto Steam Exhaust (ASE)
  • Rust Inhibitor Injector Pump
  • Steam Exhaust PVC Kit
  • High Output Electric Heat +20 kW
  • Internal Reservoir Cover
  • Remote Grease Fittings
  • Auto Oil Skimmer
  • Heated Oil Skimmer
  • Sludge Drag-Out Conveyor ( + 10" to all heights)
  • Part Basket- Large pore with lid
  • Jib Boom with Trolley
  • 5,000 lb Ratchet Strap to secure parts
  • Turntable Fixture Kit
  • Hot Air Blow-Off 3 hp and 30 kW
  • Hour Meter
  • Turntable Jog
  • Gas Heat Source
  • EQ-1 Wastewater Treatment System
  • Industrial Control Package
  • Stretched Machine Work Height Mild Steel
  • Stretched Machine Work Height Stainless Steel
  • Stainless Steel Cabinet Wetted Parts
  • Stainless Steel Pump
  • Stainless Steel Heat Exchanger
 

* NOTE: All Models available in Load Capacities Two to Three Times Greater

Industry Leader in Aqueous Parts Washer Technology
©2003 The MART Corporation. All Rights Reserved.

| About MART® | Industries & Application | Products | Technology | Owner Services | Articles | Contact |