| Home | Contact |

MART Products



Parts Washer Specifications

TORNADO 52 Retractable Turntable

request quote / info

Features & General Construction:

   

Closed Loop Zero Discharge:

Standard

Wash Pump Suction Strainer:

Standard

Adjustable Electronic & Temp Control

Standard

Temperature Gauge:

Standard

Programmable 24 Hour 7 Day Clock:

Standard

Low Water Shut-Off:

Standard

Electronic Door Safety Interlock:

Standard

Wash Cycle Timer:

Standard

Sheet Steel Cabinet Thickness:

7 ga.

230 V or 460 V- 60 Hz, 3-Ph Controls:

Standard

Automatic Water Level Control & Refill:

Standard

Osciliating Power Blast Manifold:

Standard


Power Blast Manifold:

 

OSCILLATING NON- SYNCHRONOUS

 

Angle of Oscillation:

39 degrees

Frequency of Oscillation:

4 per minute

Number of Wash Nozzles:

24

Type of Nozzle:

Vee-Jet

Nozzle Material:

316 Stainless

Nozzle Spray Pattern:

25 degrees
   

Overall Dimensions:

 
Width:  (Std Unit) 98 inches  
Depth:  (Std Unit) 87 inches
Height: 120 inches  
Empty Weight: 5,940 lbs
Reservoir Capacity: 265 gallons
Duplex Reservoir:  Add 47 gallons
Sludge Capacity: 75 gallons
   

Work Area Dimensions:

 
Turntable Diameter: 52 inches
Work Height: 75 inches
Table Load Capacity: 4,000 lbs
Heavy Duty Capacity: 7,000 lbs
    

Heat System:

 

Operating Temperature:

140 - 190 degrees F

Initial Heat-Up Time:

45 - 60 minutes

Element Size:

60 kW

Gas/Propane:

380,000 BTU/hr
   

Electrical:

 
Wiring Standard: NFPA 79
Motor Starters: Across the line
Short Circuit Protection: Std
Overload Protection: Std
Motor Type: Industrial
Motor Rating: Continuous Duty  
Enclosures: TEFC  
Enclosures: NEMA 12  
Wiring Conduit: Flex- Non-Metallic
Type of Conduit: Liquidtight NEMA12
   

Pump System & Performance:

 

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller. Note:  All performance data taken at nozzle tip.

 

 

 
STANDARD (Simplex):
20 Horsepower
Total System Flow: 269 gpm
Flow per Nozzle: 13.5 gpm
System Pressure: 107 psi
Blast Velocity: 126 ft/sec
   

UPGRADE (Duplex):

 
55 Horsepower
Total System Flow: 356 gpm
Flow per Nozzle: 17.8 gpm
System Pressure: 187 psi
Blast Velocity: 166 ft/sec
   
70 Horsepower
Total System Flow: 371 gpm
Flow per Nozzle: 18.6 gpm
System Pressure: 203 psi
Blast Velocity: 173 ft/sec
   
Results may vary based on machine configuration.




Industry Leader in Aqueous Parts Washer Technology

©2003 The MART Corporation. All Rights Reserved.

| About MART® | Industries & Application | Products | Technology | Owner Services | Articles | Contact |