The MART Corporation

| Home | Contact |

MART Products



Parts Washer Specifications

TUMBLER MHT 11

 

TUMBLER MHT 11


request quote / info

Features & General Construction:
 

Closed Loop Zero Discharge

Standard

Wash Pump Suction Strainer

Standard

Adjustable Thermostat

Standard

Temperature Gauge

Standard

24 Hour 7 Day Clock

Standard

Low Water System Shut-Off

Standard

Door Safety Interlock

Standard

Wash Cycle Timer

Standard

Sheet Steel Cabinet Thickness

7 ga

230 V or 460 V 60 Hz, 3-Ph Controls

Standard

Automatic Water Level Control & Refill

Standard


Power Blast Manifold:

 

OSCILLATING NON-SYNCHRONOUS

 

Angle of Oscillation

NA

Frequency of Oscillation

4 per minute

Number of Wash Nozzles

20

Type of Nozzle

Vee-Jet

Nozzle Material

316 Stainless

Nozzle Spray Pattern

0 and 25 degrees

   

Overall Dimensions:

 

Width ( Standard Unit )

86 inches

Depth ( Standard Unit )

78 inches

Height

81 inches 

Empty Weight

2,025 lbs

Reservoir Capacity

130 gallons

Duplex Reservoir Add 47 gallons

Sludge Capacity

37 gallons

   

Work Area Dimensions:

 

Tumbler Basket Diameter

27 inches

Tumbler Basket Length

31 inches

Tumbler Basket Load Capacity
1,200 lbs.

Tumbler Basket Load Capacity

11 cubic ft.

    

Heat System:

 

Operating Temperature

180 degrees F

Initial Heat-Up Time

90 minutes

Element Size Standard

30 kW

   

Electrical:

 

Motor Rating

Continuous Duty

Motor Starters

Across the Line

Enclosures

TEFC

Short Circuit Protection

Standard

Enclosures

NEMA 12

Overall Protection

Standard

Wiring Conduit

Flex Non-Metallic

Motor Type

Industrial

Type of Conduit

Liquidtight NEMA 12

   

Pump System & Performance:

 

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller.  Note:  All performance data taken at nozzle tip.

 

 
Standard:
10 Horsepower
Total System Flow 180 gpm
Flow per Nozzle 11.3 gpm
System Pressure 75 psi
Blast Velocity 105 ft/sec
Upgrades:
20 Horsepower
Total System Flow 221 gpm
Flow per Nozzle 13.8 gpm
System Pressure 112 psi
Blast Velocity 129 ft/sec
   
30 Horsepower
Total System Flow 236 gpm
Flow per Nozzle 14.8 gpm
System Pressure 152 psi
Blast Velocity 150 ft/sec
55 Horsepower
Total System Flow 303 gpm
Flow per Nozzle 18.9 gpm
System Pressure 212 psi
Blast Velocity 177 ft/sec
   
Optional Features:
  • Additional tumbler basket
  • Pump Sound Insulation
  • Pump Amp Meter
  • Cabinet Thermal Insulation
  • Auto Rinse Cycle (includes ASE)
  • Auto Steam Exhaust (ASE)
  • Rust Inhibitor Injector Pump
  • Steam Exhaust PVC Kit
  • High Output Electric Heat + 15 kW
  • Internal Reservoir Cover
  • Remote Grease Fittings
  • Auto Oil Skimmer
  • Heated Oil Skimmer
  • Sludge Drag Out Conveyor + 10" to ht
  • 5,000 lb Ratchet Strap to secure parts
  • Turntable Fixture Kit
  • Hour Meter
  • Turntable Jog
  • Gas Heat Source
  • EQ-1 Wastewater Treatment System
  • Industrial Control Package
  • Stainless Steel pump
  • Stainless Steel Cabinet
  • Stainless Steel Heat Exchanger

* NOTE: All Models available in Load Capacities Two to Three Times Greater



Industry Leader in Aqueous Parts Washer Technology

©2003 The MART Corporation. All Rights Reserved.

| About MART® | Industries & Application | Products | Technology | Owner Services | Articles | Contact |